An-310-rt-4l2w Firmware Download: How to Update Your Araknis Router

If you own an Araknis Networks 310-series router, you might be wondering how to download and install the latest firmware for your device. Firmware is the software that runs on your router and controls its features and performance. Updating your firmware can improve your router’s security, stability, and functionality, as well as fix any bugs or issues that might affect your network.

In this article, we will explain what an-310-rt-4l2w firmware is, why you need it, how to download and install it, and how to troubleshoot common problems that might arise after updating your router firmware. Let’s get started!

What is an-310-rt-4l2w firmware and why do you need it?

An overview of the Araknis Networks 310-series router

The Araknis Networks 310-series router is a high-performance device that can handle up to 500 devices on your network. It features four Gigabit LAN ports, two Gigabit WAN ports, and one combo port that can be used as a third WAN port or a LAN port. It also supports various VPN technologies, firewall features, dual-WAN functionality, and OvrC Pro cloud management service.

The an-310-rt-4l2w is the model number of the Araknis Networks 310-series router. It stands for Araknis Networks (AN), 310-series (310), Router (RT), 4 LAN ports (4L), 2 WAN ports (2W). The firmware is the software version that runs on this model of router.

The benefits of updating your router firmware

Updating your router firmware can bring you several benefits, such as:

• Enhancing your router’s security by fixing any vulnerabilities or bugs that might expose your network to hackers or malware.
• Improving your router’s stability by resolving any issues that might cause crashes, freezes, or reboots.
• Boosting your router’s functionality by adding new features or improving existing ones.
• Optimizing your router’s performance by increasing its speed, efficiency, and compatibility with other devices.

Some of the recent updates for the an-310-rt-4l2w firmware include:

• Adding WAN2 and WAN3 functionality for fail-over and load-balancing options.
• Adding route binding feature for more control over traffic routing.
• Adding support for Starlink ISP mobile app.
• Fixing WPA encryption vulnerability known as FragAttacks.
• Fixing command injection vulnerability that could be exploited with VPN, ping, and traceroute functions.
• Fixing NAT loopback issue on non-/24 subnets.
• Enabling IPSec Passthrough by default to support Wi-Fi Calling.

The risks of not updating your router firmware

On the other hand, not updating your router firmware can expose you to several risks, such as:

• Leaving your router vulnerable to hackers or malware that might exploit the known flaws or bugs in your firmware.
• Experiencing frequent or random issues with your router that might affect your network reliability or quality.
• Missing out on new features or improvements that might enhance your network functionality or performance.
• Encountering compatibility problems with other devices or services that might require the latest firmware version.

Therefore, it is recommended that you update your router firmware regularly to keep your network secure, stable, and functional.

How to download and install the latest firmware for your an-310-rt-4l2w router

Now that you know the importance of updating your router firmware, let’s see how you can download and install the latest firmware for your an-310-rt-4l2w router. The process is simple and straightforward, but you need to follow some steps carefully to avoid any errors or complications. Here are the steps:

Step 1: Check your current firmware version and backup your settings

Before you update your router firmware, you need to check your current firmware version and backup your settings. This will help you to compare the versions and restore your settings in case something goes wrong during the update. To do this, follow these steps:

1. Connect your computer to your router using an Ethernet cable or Wi-Fi.
2. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
3. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
4. Click Login to access the web interface of your router.
5. Go to System > Status and check the Firmware Version field. Note down the current firmware version of your router.
6. Go to System > Backup/Restore and click Backup Settings. Save the settings file to your computer.

Step 2: Download the firmware file from the Snap One website

The next step is to download the firmware file from the Snap One website. Snap One is the company that owns Araknis Networks and provides support and updates for its products. To download the firmware file, follow these steps:

1. Go to https://www.snapone.com/support/araknis-networks/310-series-router/ on your web browser.
2. Scroll down to the Firmware section and click on Download Firmware.
3. Select an-310-rt-4l2w from the drop-down menu and click Download.
4. Save the firmware file to your computer. The file name should be something like AN-310-RT-4L2W_v1.0.0_20210621.bin.

Step 3: Upload the firmware file to your router using the web interface

The third step is to upload the firmware file to your router using the web interface. This will start the firmware update process on your router. To do this, follow these steps:

1. Make sure your computer is still connected to your router using an Ethernet cable or Wi-Fi.
2. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
3. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
4. Click Login to access the web interface of your router.
5. Go to System > Firmware Upgrade and click Choose File.
6. Browse to the location where you saved the firmware file on your computer and select it.
7. Click Upload to start uploading the firmware file to your router.

Step 4: Wait for the firmware update to complete and reboot your router

The final step is to wait for the firmware update to complete and reboot your router. This will apply the new firmware version to your router and restart it. To do this, follow these steps:

1. After uploading the firmware file, you will see a message saying “Firmware upgrade in progress. Please wait…” on the web interface. Do not turn off or disconnect your router or computer during this process.
2. Wait for about 5 minutes until the firmware update is finished. You will see a message saying “Firmware upgrade completed. Please reboot the device.” on the web interface.
3. Click Reboot to restart your router. Alternatively, you can unplug and plug back in your router’s power cord.
4. Wait for another 5 minutes until your router boots up and reconnects to the internet. You will see a solid blue LED on the front panel of your router when it is ready.

Congratulations! You have successfully updated your an-310-rt-4l2w firmware to the latest version. You can now enjoy the benefits of the new firmware and check if it has fixed any issues you had before.

How to troubleshoot common issues after updating your router firmware

Sometimes, updating your router firmware might cause some problems or errors that need to be fixed. Here are some of the common issues that might occur after updating your router firmware and how to troubleshoot them:

Issue 1: The router does not boot up or shows a red LED

If your router does not boot up or shows a red LED after updating the firmware, it means that the firmware update failed or corrupted your router. This might happen if you interrupted the update process, used a wrong or damaged firmware file, or had a power outage during the update. To fix this issue, you need to perform a factory reset on your router and restore your settings from the backup file you created before. To do this, follow these steps:

1. Locate the reset button on the back panel of your router. It is a small hole labeled “RESET”.
2. Use a paper clip or a similar object to press and hold the reset button for about 10 seconds until you see the LED on the front panel flash red and blue alternately.
3. Release the reset button and wait for your router to boot up and show a solid blue LED.
4. Connect your computer to your router using an Ethernet cable or Wi-Fi.
5. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
6. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
7. Click Login to access the web interface of your router.
8. Go to System > Backup/Restore and click Choose File.
9. Browse to the location where you saved the settings file on your computer and select it.
10. Click Restore Settings to restore your settings from the backup file.

This should fix the issue and restore your router to its normal state. If not, you might need to contact Snap One support for further assistance.

Issue 2: The router does not connect to the internet or shows a yellow LED

If your router does not connect to the internet or shows a yellow LED after updating the firmware, it means that there is a problem with your WAN connection. This might happen if you changed your ISP, modem, or WAN settings during the update, or if your ISP has some issues or maintenance. To fix this issue, you need to check your WAN connection and settings and make sure they are correct and working. To do this, follow these steps:

1. Check your modem and make sure it is powered on and connected to your router’s WAN port using an Ethernet cable.
2. Check your ISP and make sure it is providing internet service and does not have any outages or maintenance.
3. Connect your computer to your router using an Ethernet cable or Wi-Fi.
4. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
5. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
6. Click Login to access the web interface of your router.
7. Go to Network > WAN and check your WAN settings. Make sure they match the settings provided by your ISP or modem. If you are not sure, you can use the Auto Detect feature to automatically detect the best settings for your connection.
8. Click Apply to save your changes and restart your router.

This should fix the issue and restore your internet connection. If not, you might need to contact your ISP or modem manufacturer for further assistance.

Issue 3: The router does not work with OvrC Pro or shows a green LED

If your router does not work with OvrC Pro or shows a green LED after updating the firmware, it means that there is a problem with your OvrC Pro cloud management service. This might happen if you changed your OvrC Pro account, password, or settings during the update, or if OvrC Pro has some issues or maintenance. To fix this issue, you need to check your OvrC Pro connection and settings and make sure they are correct and working. To do this, follow these steps:

1. Check your OvrC Pro account and make sure it is active and valid.
2. Check your OvrC Pro password and make sure it is correct and updated.
3. Check your OvrC Pro settings and make sure they are compatible with your router and network.
4. Connect your computer to your router using an Ethernet cable or Wi-Fi.
5. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
6. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
7. Click Login to access the web interface of your router.
8. Go to System > OvrC Pro and check your OvrC Pro settings. Make sure they match the settings provided by OvrC Pro or Snap One support. If you are not sure, you can use the Reset feature to reset them to default values.
9. Click Apply to save your changes and restart your router.

This should fix the issue and restore your OvrC Pro service. If not, you might need to contact Snap One support for further assistance.

Issue 4: The router settings are lost or corrupted after the update

If your router settings are lost or corrupted after updating the firmware, it means that the firmware update did not preserve your settings or caused some errors in them. This might happen if you did not backup your settings before the update, used a wrong or damaged firmware file, or had a power outage during the update. To fix this issue, you need to restore your settings from the backup file you created before or reconfigure them manually. To do this, follow these steps:

1. Connect your computer to your router using an Ethernet cable or Wi-Fi.
2. Open a web browser and type http://192.168.1.1 in the address bar. This is the default IP address of your router. If you have changed it, use the new one instead.
3. Enter admin as the username and password as the password. These are the default credentials of your router. If you have changed them, use the new ones instead.
4. Click Login to access the web interface of your router.
5. Go to System > Backup/Restore and click Choose File.
6. Browse to the location where you saved the settings file on your computer and select it.
7. Click Restore Settings to restore your settings from the backup file.

If you did not backup your settings before the update or the backup file is not working, you will need to reconfigure your settings manually. You can refer to the user manual or online guides for instructions on how to do this.

Conclusion and FAQs

In this article, we have explained what an-310-rt-4l2w firmware is, why you need it, how to download and install it, and how to troubleshoot common issues that might occur after updating your router firmware. We hope this article has been helpful and informative for you and that you have successfully updated your an-310-rt-4l2w firmware to the latest version.

If you have any questions or concerns about updating your router firmware, you can check out these FAQs or contact Snap One support for more assistance.

bc1a9a207d